dan
/
ocaml-wiringpi
mirror of https://github.com/co-dan/ocaml-wiringpi/
1
0
Fork 0
Code Issues Releases Wiki Activity

CAMLprim is not needed, use EOL80

This commit is contained in:
Marek Kubica 2014-07-06 23:25:38 +02:00
parent aecf1b42f7
commit 182bdb8393
2 changed files with 35 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
src/WiringPi.ml
View File

@ -1,5 +1,5 @@
(** This module is useful to communicate with the GPIO ports of a raspberry.
It uses the wiringPi library : http://wiringpi.com/ **)
(** This module is useful to communicate with the GPIO ports of a Raspberry Pi.
It uses the WiringPi library: http://wiringpi.com/ **)
(* Test function *)
external test_hello_world : unit -> unit = "caml_hello"
@ -11,19 +11,27 @@ external setupPhys : unit -> int = "caml_wiringPiSetupPhys"
external setupSys : unit -> int = "caml_wiringPiSetupSys"
(* ########## Write on the device ########## *)
(* This sets the mode of a pin to either INPUT (= 0), OUTPUT (= 1), PWM_OUTPUT (= 2) or GPIO_CLOCK (= 3). Note that only wiringPi pin 1 (BCM_GPIO 18) supports PWM output and only wiringPi pin 7 (BCM_GPIO 4) supports CLOCK output modes. *)
(* This sets the mode of a pin to either INPUT (= 0), OUTPUT (= 1),
* PWM_OUTPUT (= 2) or GPIO_CLOCK (= 3).
* Note that only wiringPi pin 1 (BCM_GPIO 18) supports PWM output and only
* wiringPi pin 7 (BCM_GPIO 4) supports CLOCK output modes. *)
external pinMode : int -> int -> unit = "caml_pinMode"
(* This sets the pull-up or pull-down resistor mode on the given pin, which should be set as an input. *)
(* This sets the pull-up or pull-down resistor mode on the given pin, which
* should be set as an input. *)
external pullUpDnControl : int -> int -> unit = "caml_pullUpDnControl"
(* Writes the value HIGH or LOW (1 or 0) to the given pin which must have been previously set as an output. *)
(* Writes the value HIGH or LOW (1 or 0) to the given pin which must have
* been previously set as an output. *)
external digitalWrite : int -> int -> unit = "caml_digitalWrite"
(* Writes the value to the PWM register for the given pin. The Raspberry Pi has one on-board PWM pin, pin 1 (BMC_GPIO 18, Phys 12) and the range is 0-1024. Other PWM devices may have other PWM ranges *)
(* Writes the value to the PWM register for the given pin.
* The Raspberry Pi has one on-board PWM pin, pin 1 (BMC_GPIO 18, Phys 12) and
* the range is 0-1024. Other PWM devices may have other PWM ranges *)
external pwmWrite : int -> int -> unit = "caml_pwmWrite"
(* This function returns the value read at the given pin. It will be HIGH or LOW (1 or 0) depending on the logic level at the pin. *)
(* This function returns the value read at the given pin. It will be HIGH
* or LOW (1 or 0) depending on the logic level at the pin. *)
external digitalRead : int -> int = "caml_digitalRead"
external digitalWriteByte : int -> unit = "caml_digitalWriteByte"
@ -31,10 +39,13 @@ external digitalWriteByte : int -> unit = "caml_digitalWriteByte"
(* ########## Timing ########## *)
(* Use it to wait a few ms or µs. If you want to wait for several
secondes, use Unix.sleep. *)
external delay : int -> unit = "caml_delay" (* wait n ms *)
external delayMicroseconds : int -> unit = "caml_delayMicroseconds" (* wait n µs *)
(* wait n ms *)
external delay : int -> unit = "caml_delay"
(* wait n µs *)
external delayMicroseconds : int -> unit = "caml_delayMicroseconds"
(* This returns a number representing the number if ms/µs since your program called one of the wiringPiSetup functions. *)
(* This returns a number representing the number if ms/µs since your program
* called one of the wiringPiSetup functions. *)
external millis : unit -> int = "caml_millis"
external micros : unit -> int = "caml_micros"

32
src/WiringPi_stubs.c
View File

@ -9,35 +9,30 @@
#include <wiringPi.h>
#include <wiringShift.h>
CAMLprim
value caml_hello(value unit) {
CAMLparam1(unit);
printf("Hello world!\n");
CAMLreturn(Val_unit);
}
CAMLprim
value caml_wiringPiSetup(value unit)
{
CAMLparam1(unit);
CAMLreturn(Val_int(wiringPiSetup()));
}
CAMLprim
value caml_wiringPiSetupGpio(value unit)
{
CAMLparam1(unit);
CAMLreturn(Val_int(wiringPiSetupGpio()));
}
CAMLprim
value caml_wiringPiSetupPhys(value unit)
{
CAMLparam1(unit);
CAMLreturn(Val_int(wiringPiSetupPhys()));
}
CAMLprim
value caml_wiringPiSetupSys(value unit)
{
CAMLparam1(unit);
@ -46,7 +41,6 @@ value caml_wiringPiSetupSys(value unit)
// Core functions
CAMLprim
value caml_pinMode(value pin, value mode)
{
CAMLparam2(pin, mode);
@ -54,7 +48,6 @@ value caml_pinMode(value pin, value mode)
CAMLreturn(Val_unit);
}
CAMLprim
value caml_pullUpDnControl(value pin, value pud)
{
CAMLparam2(pin, pud);
@ -62,7 +55,6 @@ value caml_pullUpDnControl(value pin, value pud)
CAMLreturn(Val_unit);
}
CAMLprim
value caml_digitalWrite(value pin, value value_p)
{
CAMLparam2(pin, value_p);
@ -70,7 +62,6 @@ value caml_digitalWrite(value pin, value value_p)
CAMLreturn(Val_unit);
}
CAMLprim
value caml_pwmWrite(value pin, value value_p)
{
CAMLparam2(pin, value_p);
@ -78,7 +69,6 @@ value caml_pwmWrite(value pin, value value_p)
CAMLreturn(Val_unit);
}
CAMLprim
value caml_digitalRead(value pin)
{
CAMLparam1(pin);
@ -89,7 +79,6 @@ value caml_digitalRead(value pin)
// Raspberry Pi Specifics
CAMLprim
value caml_digitalWriteByte(value value_p)
{
CAMLparam1(value_p);
@ -103,24 +92,24 @@ value caml_digitalWriteByte(value value_p)
// Timing
/* This returns a number representing the number if milliseconds since your program called one of the wiringPiSetup functions. */
CAMLprim
/* This returns a number representing the number if milliseconds since your
* program called one of the wiringPiSetup functions. */
value caml_millis(value unit)
{
CAMLparam1(unit);
CAMLreturn(Val_int(millis()));
}
/* This returns a number representing the number of microseconds since your program called one of the wiringPiSetup functions. */
CAMLprim
/* This returns a number representing the number of microseconds since your
* program called one of the wiringPiSetup functions. */
value caml_micros(value unit)
{
CAMLparam1(unit);
CAMLreturn(Val_int(micros()));
}
/* This causes program execution to pause for at least howLong milliseconds. Due to the multi-tasking nature of Linux it could be longer. */
CAMLprim
/* This causes program execution to pause for at least howLong milliseconds.
* Due to the multi-tasking nature of Linux it could be longer. */
value caml_delay(value howLong)
{
CAMLparam1(howLong);
@ -128,8 +117,13 @@ value caml_delay(value howLong)
CAMLreturn(Val_unit);
}
/* This causes program execution to pause for at least howLong microseconds. Due to the multi-tasking nature of Linux it could be longer. Delays under 100 microseconds are timed using a hard-coded loop continually polling the system time, Delays over 100 microseconds are done using the system nanosleep() function – You may need to consider the implications of very short delays on the overall performance of the system, especially if using threads. */
CAMLprim
/* This causes program execution to pause for at least howLong microseconds.
* Due to the multi-tasking nature of Linux it could be longer. Delays under
* 100 microseconds are timed using a hard-coded loop continually polling the
* system time, Delays over 100 microseconds are done using the system
* nanosleep() function – You may need to consider the implications of very
* short delays on the overall performance of the system, especially if using
* threads. */
value caml_delayMicroseconds(value howLong)
{
CAMLparam1(howLong);